Easy accessing with magnetic holders!

This is such an awesome holder to have! & it doesn't require much time either. :)

Basics. I'll teach you the basics. You do your best doing yours! & please be kind enough to feedback if you really did so :) Perhaps Stumble me? (Stumble Upon.com)

Okay! So..

Here's what you need -

-Magnets. (Atleast the medium size)

-Any of your eye shadow cases

-Metal or steel board. (Even an old one would be fine!)- I just got a lid of an old biscuit tin box!

- Gorgeous piece of Cloth. (If you're not satisfied with the metal or steel board's appearance)

                       ------If you are getting cloth, Make sure you get a pair of Siccors too. :)

-Blue tack & strong thread to hang the metal board. (I suggest more like Nylon thread)

-Glue (Multibond/Superglue if you're using cloth for this)

Alrighty! This is how you start with it! :

If you are satisfied with the cloth board, please skip step (1)

1) If you are not satisfied with board you got, get the cloth, cut a piece measuring the size you'd want...and sew a cover. Please pick a cloth that is very thin, so the magnet can hold onto the board.

You can make a zipped cover if you prefer or just make a cover that cannot be undone. If you're more like me and love change all the time! Then I think you should go with the zipper. :P

If you don't know how to sew the cover, let me give you the basic steps on how to do this. But if you do know you can skip this step.

||||||||||||||||||||||||||||||||||||||||||||||| Get the cloth you measured and cut. I'm hoping the board you got is not that thick? 

Well if it is, you have to cut & sew two side strips depending on the size of the thickness. Then turn them onto the wrong side & sew each strap onto each covers side. Only the sides are to be sewed! Next, sew one opening of the cover just like that & whallaa..!! You get a cover!

 If its not thick, Turn them both to the wrong side & sew each other sides. Next sew one opening just like that. There you get a cover that way!

Now get a zip to the length of the cover and sew the wrong side of the zip onto the right side of the cloth.

There after you do both sides if that opening, you're done! Now continue. :)

2) Now get the magnet & glue one side to the eye shadow case back. It'll look more like this,

3) Now put that metal board into the cover. If you didn't make a cover, or either way.. Get the blue tack & glue the Nylon thread to the back of the metal board. Make sure you stick the Blue Tack really really reallyy tight! Otherwise it'll just beak and fall! :/  

And since you're pasting it on metal, it's much harder. If you're pasting it on the cloth, you could use Multibond or Superglue or something stronger to hold on cloth.

There you go! You're done!! 

Now, take your eye shadow cases & just keep it atleast 1cm away, & it'll automatically paste! Because its magnetic!! & just hang it on your wall.. Find a height you can reach to.. :P

Basically whenever you're in a hurry or something, you can just apply and go! Do this for several cases and It'd be much easier for you to choose too because its hung on your room wall.

Not only eye shadow cases, you can hang up anything you like when they are magnetic! :D So go hang up all kindsa stuff! Try it now!

Enjoy!

Kavi Sam.